Table of Contents
Advertisement
To change the region code:
1.
Insert a DVD video into the drive.
If the region code of the DVD video is different from that of your drive, the
Confirm Region dialog box appears.
2.
The region code currently selected is checked in the left box. Region code of
your DVD video is marked in the right box. If you want to change the drive
code and play the DVD video, click OK.
On some DVD videos, plural region codes are selectable in the right box
of Confirm Region dialog box. Carefully choose an appropriate one.
When Confirm Region dialog box does not appear:
1. Click start - My Computer – View system information.
2. In the System Properties dialog box, select the Hardware tab and
click the Device Manager button.
3. In the Device Manager dialog box, double-click DVD/CD-ROM
drives string and MATSHITA xxxxxx. (xxxxxx is your optical
drive name.)
4. Select the DVD Region tab, choose the listed distribution area
of the DVD video, then, confirm the region code shown in the
New Region field is correct and click OK.
5. Read the message on the screen, then, click OK.
Using Parental Control
If you want to set the parental control to prevent your children from watching an
inappropriate movie, follow the steps below:
1.
Run the InterVideo WinDVD.
2.
Right-click somewhere in the InterVideo WinDVD5 window and click Setup....
The Setup dialog box will appear.
3.
In the Preferences tab, click the Set Password button in the Parental Playback
Control section.
4.
Type a password twice and click OK.
5.
Click OK in the confirmation window.
6.
Click the Set Rating button and enter the password.
7.
Click OK.
8.
Select a control level and click Set.
9.
Click OK. See online help of WinDVD for more details.
1
1-15
Advertisement
Table of Contents
