Table of Contents
Advertisement
3.
Loosen two screws and remove the memory slot cover.
4.
Remove the installed memory module. (Refer to the Uninstalling Memory
Module section on page A-4.)
5.
Align a new memory module as shown below, matching the notched part of the
module with the projecting part of the memory socket of the computer.
The cooling fan may be hot. Be careful not to touch it while installing the
memory module.
Projecting Part
A-2
Screws
Cooling Fan
Slot
Notched Part
Memory Module
20°
Slot
Memory Slot Cover
Advertisement
Table of Contents
