Table of Contents
Advertisement
3.
Connect one end of the LAN cable to the LAN jack and the other end to the
network hub.
LAN Jack
4.
Turn on the computer.
Configuring LAN Unit
1.
Click start - Control Panel.
2.
Click Network and Internet Connections; then, Network Connections. If the
Classic view is selected, double-click the Network Connections icon.
3.
Right-click Local Area Connection.
4.
From the pop-up menu, click Properties.
5.
In the Local Area Connection Properties dialog box, set the network setting
according to the instruction of your network administrator.
Make sure to log on the computer as a member of the Computer
administrators group. Otherwise, you cannot set or change some settings
for the LAN unit.
If you cannot access the network,
1.
Click start - Control Panel.
2.
Click Performance and Maintenance; then, System. If Classic view is selected,
double-click System icon.
3.
Click Hardware tab; then, the Device Manager button.
4.
Double-click Network adapters, then, VIA PCI 10/100Mb Fast Ethernet
Adapter.
5.
Click the Advanced tab, and select Connection Type in the Property list and
select an appropriate value in the Value pull-down menu.
6.
Click OK and close the Device Manager window.
7.
Click OK and close the Control Panel window.
To Network Hub
LAN Cable
4
4-5
Advertisement
Table of Contents
