Table of Contents
Advertisement
CPU and System Fan Connector
Plug in the CPU fan cable to the 3-pin CPUFAN1 connector. If you have chassis fan, you can also plug
it on SYSFAN2 or SYSFAN3 connector.
SYSFAN3 connector
GND
+12V
SENSOR
CPUFAN connector
SYSFAN2 connector
Connecting Serial ATA Connector
To connect a Serial ATA disk, you must use a 7-pin serial ATA cable. Connect two ends of the serial
ATA cable to the serial ATA header on the main board and the disk. Like every other traditional disk,
you also have to connect a power cable. Please note that it is a jumper free implement; you don't
need to set jumpers to define a master or slave disk. When connecting two serial ATA disks, the
system will automatically take the one connected to "Serial ATA 1" header as a master disk.
SATA1 header
SATA2 header
37
Advertisement
Table of Contents
