Table of Contents
Advertisement
3.
For EZ18 XC cube PC. Before taking AOpen-made Cooler out, please disconnect its connector
first. After that, unfasten AOpen-made Cooler.
Take the cooler out of the chassis. Put it aside for later use then.
The bottom of Cooler had been protected
with a plastic cover when shipped.
Please take it off when you want to put the
cooler on CPU.
Where's the direction ？
It would be a lot of problem if we have had
installed the devices in the incorrect direction.
Therefore, please kindly pay attention to the
FRONT mark shown in the picture.
Use a screwdriver to push
the iron lock down to relieve
it from the socket.
14
Advertisement
Table of Contents
