Canon Pixma MP495 Series On-Screen Manual page 729

Initializing the Network Settings of the Machine
>
Advanced Guide About Network Communication
Settings of the Machine
N019
Initializing the Network Settings of the Machine
Important
Note that initialization erases all network settings on the machine, and printing or scanning
operation from a computer over network may become impossible. To use the machine over
network, refer to the setup manual of the machine to set up the machine again.
1.
Start up the Canon IJ Network Tool.
Starting up Canon IJ Network Tool
2.
Select the printer in Printers.
3.
Select Maintenance from the Settings menu.
1. Setting Initialization
Initialize
Reverts all the network settings of the printer to factory default. Click Initialize to display the
Initialize Settings dialog box and click Yes to initialize the network settings of the printer. Do not
turn off the printer during initialization. Click OK when initialization is complete.
Performing initialization when connected over wireless LAN will break the connection, so refer
to your setup manual of the machine to set up the machine again.
Note
You can change the network settings of the printer using Canon IJ Network Tool with USB
connection after initializing the LAN settings. To change the network settings using Canon IJ
Network Tool, activate Wireless LAN in advance.
Follow the procedure below to activate Wireless LAN.
1. Press the Maintenance button repeatedly until the LED displays as follows.
2. Press the Color button.
>
Changing and Confirming Network Settings
Page 729 of 759 pages
> Initializing the Network
Page top