Canon Pixma MP495 Series On-Screen Manual page 328

Copying without Borders (Borderless Copy)
> Printing Using the Operation Panel of the Machine
Advanced Guide
Copying without Borders (Borderless Copy)
U039
Copying without Borders (Borderless Copy)
You can copy images on photo paper so that they fill the entire page without borders.
1.
Make sure that the machine is turned on.
2.
Load photo paper on the Rear Tray.
3.
Press the Paper button to select the page size.
Select the page size according to the paper loaded on the Rear Tray.
Note
You can switch the size of paper loaded on the Rear Tray between A4 and Letter.
Switching the Page Size between A4 and Letter
When the page size for plain paper is selected, borderless copying is not available.
4.
Press the Fit to Page button.
The Fit to Page lamp lights up.
Note
To cancel borderless copying, press the
Page button, the
You can use the Fit to Page button only when you are using the copy function.
5.
Specify the number of copies (max. 20 copies).
To make 1 to 9 copies or 20 copies
Display the desired number of copies on the LED. Each time you press the + button, the number on
the LED increases by one.
When the LED displays as follows, the number of copies is set to "20". Press the + button again to
return to "1".
To make 10 to 19 copies
1. Press the + button repeatedly until the LED displays as follows.
2. Load only the desired number of sheets to copy.
Note
Pressing the Stop/Reset button returns the number of copies to 1.
Fit to Page button again. When pressing the Fit to
Fit to Page lamp is off and the borderless copying is canceled.
> Copying >
Using Useful Copy Functions
Page 328 of 759 pages
>