Canon Pixma MP495 Series On-Screen Manual page 613

The Machine Cannot Be Powered On
>
Advanced Guide Troubleshooting
U303
The Machine Cannot Be Powered On
Check 1: Press the ON button.
Check 2: Make sure that the power plug is securely plugged into the
Power Cord Connector of the machine, then turn it back on.
Check 3: Unplug the machine from the power supply, then plug the
machine back in and turn the machine back on after leaving it for at
least 2 minutes.
If the problem is not resolved, contact the service center.
> The Machine Cannot Be Powered On
Page 613 of 759 pages
Page top