Installing Weight Saver - Sharp Actius PC-AV18P Operation Manual

9. Open the display cover; turn on your computer and check the memory size; by
clicking start – My Computer – View system information of System Tasks. Your
memory size appears at the bottom of the sentence in General tab. Share video
memory size will not be included with the value.
Uninstalling Memory Module
1. Follow steps 1-3 of Installing Memory Module.
2. Turn over the sheet and slightly bend both latches outwards until the memory
module is released.
3. Remove the memory module and follow steps 6-9 of Installing Memory Module.

Installing Weight Saver

You can change the optical drive unit for the weight saver to make your computer
lighter. With the weight saver installed instead of the optical drive unit you can get the
better portability.
Always keep either of the optical drive unit or the weight saver installed
into the optical drive bay. Leaving the optical drive bay empty may
damage your computer.
Installing Weight Saver
1. Turn off your computer and disconnect the AC adapter from your computer.
Make sure to turn off your computer and remove the AC adapter.
Otherwise your computer may be damaged.
2. Close the display cover and turn over your computer on a stable surface.
Latches
A-5