Table of Contents
Advertisement
2.
Type ipconfig/all; then, press Enter. The IP information appears.
3.
See the numbers of Physical Address in Ethernet adapter Network Adapters
section.
4.
Type exit; then, press Enter.
Question: Why can't I detect the access point on my computer? (for
wireless LAN model only)
•
Confirm the access point is powered on.
•
Restart your computer.
•
Confirm your computer is enabled for the wireless LAN.
•
Detect the access point by following the steps below
1.
Click start – My Computer.
2.
Select My Network Places in Other Places; then, View network connections
in Network Tasks. Network Connections dialog box appears.
3.
Right-click Wireless Network Connection; then, click Disable.
4.
Right-click Wireless Network Connection; then, click Enable.
•
When you have more than one available access points, your computer may be
connected to other than right one you want to access:
1. Right-click (
Networks.
2. Select the desired network in the Available networks list; then, click Connect
button.
Question: Why can't I connect to the network via an access point? (for
wireless LAN model only)
•
Confirm Any available network (access point preferred) is selected in Networks to
access of Advanced dialog box.
•
Confirm the ESSID of your computer matches the ESSID of the access point you
want communicate with.
•
Confirm the WEP key is correctly entered if the WEP security of the access point is
enabled.
T-8
) icon on the taskbar; then, click View Available Wireless
Advertisement
Table of Contents
