Table of Contents
Advertisement
4.
Click start – Control Panel – Appearance and Themes in Category view.
5.
Click Change the screen resolution string.
6.
Set the Screen resolution to 800 by 600 pixels and set the Color quality back to
Medium (16 bit).
Make sure to set the Screen resolution to 800 by 600 pixels and the Color
quality to Medium (16 bit) when you display the image on TV. Otherwise,
the image cannot be displayed properly.
2
7.
Click Advanced button and select S3Display tab.
8.
Check the box of TV and click OK twice.
9.
If you can see the screen image on the television set, click Yes.
10.
Click OK and close the Display Properties dialog box.
Disconnecting TV Set
1.
Turn off your computer and the television set.
2.
Disconnect the television set from your computer.
• Before disconnecting the television set, be sure to turn off your
• After disconnecting the television set, set back the display property.
Enjoying Dolby Digital Audio
Your computer is Dolby Digital compliant. With Dolby Digital compliant audio
equipment or headphones, you will have an audio output similar to a big theater.
Follow the steps below. (Refer to Audio System of Chapter 4 for connection.)
1.
In Setup dialog box, click Audio tab. (Refer to the steps in Using Parental
Control section to open the Setup dialog box.)
2.
Select Digital (S/PDIF) out to External Processor, then, click OK.
WinDVD allows you to enjoy virtual surround sound through your
speakers or headphones. To enable this function, follow the steps on the
next page.
When you listen to the movie through speakers:
2-14
computer and the television set.
(Refer to Adjusting Display later in this chapter.)
1.
Connect your speakers to your computer and click the subpanel
Advertisement
Table of Contents
