Transport; Care And Maintenance; Troubleshooting - Hotsy 333 Manual

Transport

DANGER
Risk of injury! Risk of tipping with high in-
clines, if the inclination is too large to the
side and with unstable surfaces.
– The appliance should only be used on
gradients of max. 2%.
– Only use the machine on sound surfac-
es.
CAUTION
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
 Lay the appliance on its rear prior to
transporting it and drain the residual
water.
 Pull the device behind you at the carry-
ing handle for transporting it over longer
distances
 To carry, hold the appliance by the han-
dles and the pushing handle.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.

Care and maintenance

DANGER
Risk of injury by inadvertent startup of ap-
pliance and electrical shock.
First pull out the plug from the mains before
carrying out any tasks on the machine.
 Set the appliance switch to "0/OFF".
 Shut off water supply.
 Turn on pump shortly (appr. 5 seconds)
with device switch.
 Set the appliance switch to "0/OFF".
 Activate hand spray gun until device is
pressure less.
 Pull main plug out of socket with dry
hands only.
 Remove water connection.
 Lock the trigger gun.
 Allow device to cool down.
12
Safety inspection/ maintenance
You can sign with your dealer a contract for
regular safety inspection or even sign a
maintenance contract. Please take advice
on this matter.
Maintenance intervals
Weekly
 Clean filter in the water connection.
Monthly
 Clean filter at the detergent suck hose.
Every 500 operating hours, at least
annually
 Have the maintenance of the device
performed by the customer service.
Maintenance Works
Note: It is not necessary to perform an oil
change on the high-pressure pump.
Clean filter in the water connection.
 Remove the filter.
 Clean filter in water and reinstall.
Clean filter at the detergent suck hose
 Clean filter in water and reinstall.

Troubleshooting

DANGER
Risk of injury by inadvertent startup of ap-
pliance and electrical shock.
First pull out the plug from the mains before
carrying out any tasks on the machine.
Appliance is not running
– No power
 Check power connection/conduit.
– Engine overload/overheat
 Set the appliance switch to "0/OFF".
 Allow device to cool down.
 Turn on the appliance.
 If malfunction still occurs, have device
checked by customer service.
– 7
EN
contract