Watching Tv - Sharp IT-23M1U Operation Manual

Watching TV

TV memory for channels is empty at shipment.
The first time you use the monitor or when you
move to a new area, set the channels using the
CHANNEL SETTING menu. (See page E22.)
POWER
PC
FREEZE
SLEEP
BRIGHT
MODE
DISPLAY
1. Select a channel using the CH buttons or
channel buttons.
Pressing one of these buttons automatically
switches to TV mode if the monitor is in PC or AV
mode.
To select a 1- or 2-digit channel number
(e.g., Channel 5):
Complete the following procedure within 4
seconds.
1. Press the 0 button.
2. Press the 5 button.
Note:
- When selecting a 1-digit channel number, do
not fail to press the 0 button first.
To select a 3-digit channel number
(e.g., Channel 115):
Complete the following procedure within 4
seconds.
1. Press the 100 button.
2. Press the 1 button.
3. Press the 5 button.
2. Adjust the volume.
See page E27 for more information.
IT-23M1U_gb_02.P65
Watching TV
Virtual
TV AV1 AV2
MULTI VIEW MODE
MENU
ENTER
BRIGHT
CC MTS MUTE
VOL
CH
FLASHBACK
41
Notes:
- To switch the display mode to TV in the following
cases when in PC mode, press the TV button.
- When watching TV in the PIP/SPLIT window.
(See page E29.)
- When listening to the TV. (See page E30.)
- The 3-digit channel number can be selected
only when the receiving mode is set to "CABLE"
in the CHANNEL SETTING menu. (See pages
E22 and E23.)
- You can also change the channel up/down one
at a time using the CH buttons on the remote
control and the monitor.
E41
2004/08/20, 10:43