Advertisement
Available languages
Available languages
Turning power on/off
Turning power on
When the power LED is off:
1. Press the MAIN POWER button on the monitor.
2. Turn on power for the connected equipment.
After a while the power LED will light green, and
then the display mode will be displayed for
several seconds.
When the power LED is lit red (standby):
1. Press the POWER button on the remote control.
2. Turn on power for the connected equipment.
The power LED will light green, and then the
display mode will be displayed for several
seconds.
Turning off power
1. Turn off power for the connected equipment.
2. Press the POWER button on the remote control.
The power LED will light red (standby).
3. Press the MAIN POWER button on the monitor.
The power LED will go out.
Notes:
- Always wait at least 5 seconds between
switching power off/on. Rapid switching may
damage the monitor or cause it to malfunction.
- After switching power on, it may take a little
while before the screen displays an image.
- Do not turn off the power immediately after
changing various settings on the screen. The
changed values may not have been saved in the
memory yet.
IT-23M1U_gb_01.P65
Common operations
POWER
Virtual
PC
TV
AV1
AV2
FREEZE
MULTI
VIEW MODE
SLEEP
MENU
ENTER
BRIGHT
BRIGHT
MODE
25
Switching display modes (INPUT)
POWER
PC
TV
FREEZE
MULTI
SLEEP
BRIGHT
MODE
1. Press the PC, TV, AV1, or AV2 button.
The monitor will switch to the display mode for
the button you pressed.
Each time you press the PC button in PC mode,
the signal input terminal changes from analog to
digital, or from digital to analog.
Display modes
PC
PC mode
(analog/digital) image.
Number TV mode
AV1
AV1 mode
AV2
AV2 mode
E25
2004/08/20, 10:42
Virtual
AV1
AV2
VIEW MODE
MENU
ENTER
BRIGHT
P C
ANALOG
Displays the computer's
Displays the TV's image.
The number is the
channel being received.
Displays the image from
the equipment connected
to the AV1 input.
Displays the image from
the equipment connected
to the AV2 input.
Advertisement
Chapters
