Setting Tv Channels - Sharp IT-23M1U Operation Manual

The following table shows the channels this
monitor can receive.
VHF
Channels 2 through 13
UHF Channels 14 through 69
Channel 1 (HRC and IRC mode only)
Cable
Channels 2 through 125 (STD, HRC and IRC)
(You must subscribe to a cable TV service to
receive cable channels.)
TV memory for channels is empty at shipment. To
receive channels, use the CHANNEL SETTING
menu.
Note:
- Release the adjustment lock (see page E54) if it
has been set. You cannot use the CHANNEL
SETTING menu while the adjustment lock is set.
Channel setting methods
There are two ways to set channels.
Automatically setting channels you can receive
(CHANNEL SEARCH)
The monitor will automatically set the channels it
can receive in your area.
Setting channels one at a time
(CHANNEL MEMORY)
This method is for manually setting the channels
you want one by one. Use this method if you want
to add other channels after using "CHANNEL
SEARCH".
IT-23M1U_gb_01.P65

Setting TV channels

22
Displaying the CHANNEL SETTING menu
1. Press the MAIN POWER button to turn on the
monitor.
When the power LED lights red, press the
POWER button on the remote control.
2. Press the TV button to select TV mode.
A channel number will appear in the upper-right
corner of the screen.
3. Press the MENU button to display the MENU
screen.
MENU
VIDEO ADJUST
AUDIO ADJUST
CHANNEL SETTING
SCREEN ADJUST
MODE SELECT
CLOSED CAPTION
V-CHIP BLOCK
4. Press the buttons to select "CHANNEL
SETTING", and press the ENTER button.
The CHANNEL SETTING menu will be
displayed.
CHANNEL SETTING
RETURN
AIR/CABLE
CABLE MODE
CHANNEL SEARCH
CHANNEL MEMORY
E22
2004/08/20, 10:42
POWER
Virtual
PC TV AV1 AV2
FREEZE MULTI VIEW MODE
SLEEP MENU
ENTER
BRIGHT
BRIGHT
MODE
< >
TV/AV
>>
>>
>>
>>
>>
>>
>>
< >
TV/AV
[ AIR ]
[ STD ]
>>
>>