K641/K641LX LCD Keypad
Quick Start
Overview
AC light (ON = power ON;
OFF = power OFF)
Status light (ON = zones closed
OFF = zones open
Flash = exit delay)
RX/TX logo (K641LX only)
Clear key (erases current data entry
or reverts to preceding step)
How to Arm
Arming When Exiting (Regular/Force Arm)
To arm your system when exiting:
Step Description
1. Enter your [
ACCESS CODE
• To Regular arm, press the [
area when all zones are closed).
• To Force arm, press the [
area without waiting for all zones to close).
2. Select the desired area or press the [0] key for
all areas.
K641L-EQ00 05/2011
K641LX shown
].
] key (arms entire
ARM
] key (arms entire
FORCE
LCD (displays system
status and messages)
Arrow keys (use to scroll the
menu options)
ACC key (press for 2 seconds to
perform an action without
entering an access code)
Enter key (saves current data
and exits current menu)
Arming When Staying (Stay/Instant Arm)
To arm your system when staying:
Step Description
1. Enter your [
ACCESS CODE
• To Stay arm, press the [
perimeter only, which allows you to remain in the
protected area).
• To Instant arm, press the [5] key (stay arms the area
but an alarm will occur instantly any zone opens)
2. Select the desired area or press the [0] key for
all areas.
].
] key (arms area's
STAY