Table of Contents
Advertisement
8.1
Digital measurements
In digital measurement mode, in addition to the RF level and to the C/N here above, the appliance also dis-
plays the various BER (Bit Error Rate), the PER (Packet Error Rate) and the MER (Modulation Error Ratio)
under DVB-T/T2, DVB-S/S2 or DSS.
"Sync ?" displayed on screen means that the signal is absent or unlocked; check its
presence, the modulation parameters, the presence of remote power supply and the LNB
and DiSEqC parameters under satellite band.
The sign < before a value or error rate shows that there is no error but that 10
been tested (i.e. <10
DVB-S2
Seuil min
-8
8
means that 10
47
77
Seuil max
bits have been tested).
p.
52
-X
bits have
Advertisement
Table of Contents
