Table of Contents
Advertisement
5.3
List of setups
In order to make easier the recall of data on field, the appliance uses 500 setups in satellite and 500 setups
in terrestrial.
Example of list of terrestrial setup
A setup is made of:
•
a setup name in 8 characters
•
a satellite/emitter name in 10 characters
•
a frequency
•
a channel number in terrestrial
•
a frequency map in terrestrial
•
a vertical or horizontal polarization in satellite mode
•
a low or high LNB band in satellite mode
•
a standard
•
an analogical mono stereo or NICAM mode in terrestrial
•
a symbol rate under DVB-S, DVB-S2 or DSS
According to the terrestrial, cable or satellite band mode and to the standard, some parameters have no in-
fluence.
The place name may distinguish two distinct emitters, example TF1 Fourvière and TF1 Chambéry.
Frequency and channel number are equivalent: a valid channel number has priority over a frequency.
The frequency map parameter associated with the setup allows frontiersmen to keep on using channel num-
bers.
Selecting a Setup on a measurement page automatically recalls all information associated
with this setup.
Example of list of satellite setup
p.
28
Advertisement
Table of Contents
