Table of Contents
Advertisement
Attention: To exit a window like in this example below, press the key:
2.2
Signal spotting
The MCT 048B allows spotting signals in terrestrial or in satellite mode.
In the following chapter, we will see how to spot a signal on three types of installation:
•
Checking of a terrestrial antenna (the installation has already been made).
•
Installation of a terrestrial antenna.
•
Installation of a satellite dish.
2.2.1
Checking a terrestrial antenna
In this case, the Autoset function allows a scan of the channels that the antenna detects.
Plug the cable of your antenna to the MCT 048B (take care to use an adequate adaptor)
Turn on your appliance, then select terrestrial mode :
The Home page appears on screen. Press Autoset
The scan should range from the E21 to the E69 channels, frequency range Europe (you may reduce the
number of channels to scan if you know the range of the emitter where the antenna points at: the scan will
be faster)
p.
12
Advertisement
Table of Contents
