Adjusting Beverage Settings - Siemens TI 917 MK Series Instruction Manual

:
Warning
Risk of burns!
The outlet system becomes very hot.
After use, always let the outlet system
cool down before you touch it.
The appliance is switched on. The water
tank has been filled.
Place a cup under the outlet system.
1.
Remove the milk container, if
2.
connected.
Select "Hot water" with the rotary
3.
selector.
To change the settings for the
4.
selected drink

~ "Adjusting beverage settings"

on page 47
Button Function
Selecting the coffee
"
strength, ground coffee
milk Milk/coffee mixing ratio
ml Cup size
Two cups at once
#
Navigation Water temperature*
button, left
Navigation aromaIntense*
button, right
* Only available in "barista mode"
The appliance is set to "barista mode"
by default. Additional values can
therefore be set using the two
navigation buttons. "Barista mode" can
also be switched off. ~ "Menu
settings" on page 51
To begin dispensing the drink, press
5.
the rotary selector.
Hot water is dispensed into the cup.
To prematurely stop dispensing
Note:
the drink, press the rotary selector
again.
Adjusting beverage settings
Once you have selected a drink, you
can adjust certain values depending on
the drink. To do so, please use the
following buttons and the rotary
selector:
Selection
very mild*
■
mild
■
mild +*
■
normal
■
normal +*
■
strong
■
strong +*
■
very strong
■
Setting share of milk in %
(only for coffee drinks with milk)
Adjustment of the volume in ml increments.
Not available for ristretto.
Place two cups under the outlet.
e.g. for tea drinks:
> 70°C (white tea)
■
> 80°C (green tea)
■
normal
■
intense
■
The factory settings are shown in
orange on the display. The currently
selected settings are backlit.
Operating the appliance en
very strong +*
■
extra strong
■
aromaDoubleShot
■
strong
aromaDoubleShot
■
strong +
aromaDoubleShot
■
strong ++*
Ground coffee
■
> 85°C (rooibos tea)
■
> 90°C (black tea)
■
> 97°C (fruit tea)
■
intense +
■
47