Adjusting Beverage Settings - Siemens TI35A Series Instruction Manual

en Operating the appliance
The appliance is switched on. The water
tank and bean container have been
filled.
The milk frother is installed.
Fill a large cup or a large glass with
1.
approx. 100 ml milk for cappuccino
and approx. 150 ml milk for latte
macchiato.
Place a cup or a glass under the
2.
outlet system.
3. Push the coffee dispenser and milk
frother right down.
Touch % repeatedly to select
4.
the required coffee strength.
Touch the cappuccino or latte
5.
macchiato button.
The milk is first frothed up in the cup or
glass. The coffee is then brewed and
dispensed into the cup or glass.
Note:
To stop current dispensing of the
drink before the end, touch cappuccino
or latte macchiato again.
Frothing up milk
The appliance is switched on. The water
tank has been filled.
The milk frother is installed.
Fill a large cup or a large glass with
1.
approx. 100 ml milk.
2. Place a cup or a glass under the
outlet system.
Push the coffee dispenser and milk
3.
frother right down.
Touch the milk button.
4.
The milk is frothed up.
Note: To stop the process before the
end, touch milkagain.
14

Adjusting beverage settings

C offee strength
A d j u s t i n g b e v e r a g e s e t t i n g s
Before making a drink, you can adjust
the coffee strength:
To do so, touch % to select the
strength you require.
Note: The coffee strength selected is
then active for all drinks made with
coffee.
Filling level
You can adjust the filling level of your
drinks.
Press and hold espresso or caffe
crema for 3 seconds.
Dispensing takes place, with the button
selected flashing.
Once the required filling level is reached
in the cup, touch the button selected to
stop. The new filling level is only
apparent after the next drink is
dispensed.
Note: The filling level can be selected
either for Espresso (25 - 60 ml) or Caffe
crema (80 - 200 ml).A minimum
quantity is always brewed: Espresso
approx. 25 ml and Caffe crema
approx. 80 ml.
mild
regular
strong