Table of Contents
Advertisement
Installation
Unscrew the angle trims from both
sides of the appliance door and place
the trims and screws to one side –
they will be required later.
Close the appliance door.
Measure the gap X between the
mounting frame and the upper edge
of the adjacent cabinet front.
40
Remove the nuts and washers
from the threaded bolts and store
them in a safe place – they will be re-
quired later.
Take the mounting frame off the
appliance door by removing it up-
ward.
For inset fronts: always pay attention
to the length of the screws when se-
curing the metal strip to the cabinet
fronts.
Advertisement
Table of Contents
