Installing The Water Hose To The Appliance - Miele KF 2981 Vi Operating And Installation Instructions

Installing the water hose to the
appliance
Before establishing the plumbed-wa-
ter connection, ensure that the appli-
ance is disconnected from the power
supply.
When installing the water hose, make
sure that it is neither kinked nor dam-
aged.
By this time, the installation niche
should already have been prepared so
that the appliance needs only to be
pushed into it.
 Position the appliance slightly in front
of the installation niche so that the
shut-off valve can still be accessed.
2
The water connection of the appli-
ance  is ready for connection at the
rear of the appliance.
 Install the water hose  onto the wa-
ter connection  at the rear of the
appliance. Ensure that the connec-
tions are tight and leak-proof.
Water connection
2
 Connect the water hose  to the
shut-off valve.
 Ensure that it is properly screwed into
position.
 Slowly open the shut-off valve in the
water supply line and check the
whole water system for leaks.
 The appliance can now be installed in
the niche (see "Installation").
 The appliance can now be connected
to the power supply (see "Electrical
connection").
7/16"
49