Start Up Your Synology Nas - Synology NAS FS3410 Hardware Installation Manual

Start up Your Synology NAS

To start up your FS3410:
1 Connect one end of each power cord to the power ports located on the back of the FS3410 and the other end
to a power outlet.
2 Connect at least one LAN cable to one of the LAN ports and the other end to your switch, router, or hub.
3 Press the power button to turn on the FS3410.
Congratulations! Your Synology NAS is now online and detectable from a network computer.
19 Chapter 2: Hardware Setup