Start Up Your Synology Nas - Synology NAS FS6400 Hardware Installation Manual

3 Press the power button on the front panel to power on your FS6400. The expansion unit ID of RX1217sas/
RX2417sas connected to FS6400 will be displayed in sequence on the back panel.

Start up Your Synology NAS

To start up your FS6400:
1 Connect one end of each power cord to the power ports located on the back of the FS6400 and the other end
to a power outlet.
2 Connect at least one LAN cable to one of the LAN ports and the other end to your switch, router, or hub.
3 Press the power button to turn on the FS6400.
Congratulations! Your Synology NAS is now online and detectable from a network computer.
19 Chapter 2: Hardware Setup
FS6400
RX1217sas
RX1217sas