Other Led Indicators - Synology NAS FS3410 Hardware Installation Manual

Other LED Indicators

LED Indicator
ALERT
Drive Status Indicator
(on tray)
PSU Indicator (Delta)
PSU Indicator (Lite-On)
Rear 1GbE LAN
(on left side of jack)
Rear 1GbE LAN
(on right side of jack)
Rear 10GbE LAN
(on left side of jack)
Rear 10GbE LAN
(on right side of jack)
Note:
1 Please try to restart your Synology NAS or re-insert the drives, then run the HDD/SSD manufacturer's
diagnostic tool to check the health status of the drives. If you can sign in to DSM, please run the built-in
S.M.A.R.T. test to scan the drives. If the problem remains unresolved, please contact Synology Technical
Support for help.
2 If the ALERT LED continuously blinks orange, this indicates there are system errors such as fan failure,
system overheating, or volume degrade. Please sign in to DSM for detailed information.
8 Chapter 1: Before You Start
Color Status
Orange Blinking
Off
Static
Green
Blinking
Red Static
Off
Static
Green
Blinking
Orange Static
Off
Static
Green
Blinking
Orange Static
Off
Static
Green
Blinking
Off
Green Static
Orange Static
Off
Static
Green
Blinking
Off
Green Static
Orange Static
Off
Description
Fan failure/Over temperature
System normal
Drive ready and idle
Accessing drive
Locating drive
Drive deactivated by user
Port disabled 1
Removing this drive will cause
system damage; this is the only drive
with DSM installed.
No internal drive
Power supply unit normal
Power supply unit standby
Power supply unit failed/unplugged
Power supply unit off
Power supply unit normal
Power supply unit standby
Power supply unit failed
Power supply unit off
Network connected
Network active
No network
1 Gbps connected
100 Mbps connected
10 Mbps connected/No network
Network connected
Network active
No network
10 Gbps connected
1 Gbps connected
No network