Table of Contents
Advertisement
No.
Article Name
8
PSU Fan
9
Power Port
10
PSU Indicator
11
Console Port
PCI Express
12
Expansion Slot
13
1GbE LAN Port
14
10GBase-T LAN Port
15
USB 3.2 Gen 1 Port
16
Management Port
17
RESET Button
5 Chapter 1: Before You Start
Location
Disposes of excess heat and cools the PSU.
Connect power cord here.
Displays the status of the power supply unit (PSU). For more
information, see "Other LED Indicators".
This port is reserved for manufacturing use only.
Supports two PCIe x8 add-on network interface cards.
Connect RJ-45 network cables here.
Connect RJ-45 network cables here.
Rear
Connect external drives or other USB devices to the Synology
NAS here.
This port is used for out-of-band management only.
1. Mode 1: Press and hold until you hear a beep sound to restore
the IP address, DNS server, and password for the admin
account to default.
2. Mode 2: Press and hold until you hear a beep, release the
button immediately, then press and hold again until you hear
three beeps to return the Synology NAS to "Not Installed"
status so that DiskStation Manager (DSM) can be reinstalled.
For detailed information on how to reset your Synology NAS,
please refer to
Description
this
article.
Advertisement
Table of Contents
