Ice Dispenser D45 and D90 Installation Manual
Fill the hopper with ice and replace the lid. Pushing the dispenser lever will cause ice to flow from the ice chute. Ice
flow will continue until the lever is released. If ice does not dispense, see the TROUBLESHOOTING GUIDE to find
the cause.
NOTE: Use caution to avoid spilling ice when filling dispenser. Immediately clean up any spilled ice
from filling or operating the unit. To prevent contamination of ice, the lid must be installed on the
unit at all times.
Publication Number: 91561
OPERATING INSTRUCTIONS
- 7 -
© 1992-2011, IMI Cornelius Inc.