Setting Up The Projector Network Environment - Sharp Notevision XG-PH50X-NL Setup Manual

Setting up the Projector Network Environment

This section describes the basic procedure for using the projector via the network.
If the network is already constructed, the projector's network settings may need to be changed. Please
consult your network administrator for assistance with these settings.
1.
Connecting the projector to a computer
Connect a commercially available LAN cable (UTP cable, Category 5, cross-over type) between the com-
puter and projector.
2.
Setting an IP address for the computer
Adjust the IP settings of the computer to enable one-to-one communications with the projector.
3.
Setting up a network connection for the projector
Adjust the projector network settings to conform to your network.
• Microsoft ® and Windows
other countries.
• All other company or product names are trademarks or registered trademarks of their respective compa-
nies.
LAN cable
® are registered trademarks of Microsoft Corporation in the United States and/or
Page 18
Temporarily change
the computer's IP
address.
Pages 19, 20
Use Internet Explorer
(version 5.0 or later)
to make various
projector settings.
Page 21
-17