Replacing The Optical-Drive Connector Board; Procedure; Post-Requisites - Dell Inspiron 15 5000 Service Manual

Replacing the optical-drive
connector board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Align the screw hole on the optical-drive connector board with the screw hole on
the palm rest and keyboard assembly.
2 Replace the screw (M2x2) that secures the optical-drive connector board to the
palm rest and keyboard assembly.
3 Connect the optical-drive connector-board cable to the system board.
4 Close the latch that secures the optical-drive connector-board cable to the
system board.

Post-requisites

1 Replace the base
2 Replace the optical drive
42
computer. After working inside your computer, follow
After working inside your
cover.
(optional).
computer. For more safety best
www.dell.com/
Before