Replacing The Optical-Drive Connector Board; Procedure; Post-Requisites - Dell Inspiron 17 5000 Series Owner's Manual

Replacing the Optical-Drive
Connector Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Slide and connect the optical-drive connector board to the system
board.
2 Replace the screw that secures the optical-drive connector board to the
computer base.

Post-requisites

1 Replace the palm
2 Replace the keyboard.
3 Replace the wireless
4 Follow the procedures from step 3 to step 5 in replacing the
5 Replace the optical drive
6 Replace the base
7 Replace the battery.
58
Computer. After working inside your
rest.
card.
cover.
After Working Inside Your
hard drive.