Removing The Display Assembly; Prerequisites; Procedure - Dell Inspiron 15 5000 Service Manual

Removing the display assembly

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1 Remove the optical drive
2 Remove the base
3 Remove the wireless

Procedure

NOTE: Steps 1 to 3 are applicable only for the computers that are shipped
with optical drive.
1 Lift the latch and disconnect the optical-drive connector-board cable from the
system board.
2 Lift the latch and disconnect the optical-drive connector-board cable from the
optical-drive board connector.
3 Lift the optical-drive connector-board cable off the system board.
4 Open the latch and disconnect the display cable from the system board.
74
computer. After working inside your computer, follow
After working inside your
(optional).
cover.
card.
computer. For more safety best
www.dell.com/
Before