Replacing the optical-drive connector board
NOTE:
Enne arvuti sisemuses tegutsema asumist tutvuge arvutiga kaasas oleva ohutusteabega ja järgige jaotises
kui arvuti sees toimetama asute
arvuti sees toimetamist
veebiaadressil www.dell.com/regulatory_compliance.
Procedure
1. Align the screw hole on the optical-drive connector board with the screw hole on the palm rest and keyboard assembly.
2. Replace the two screws (M2x2) that secure the optical-drive connector board to the palm rest and keyboard assembly.
3. Connect the optical-drive connector-board cable to the system board.
4. Close the latch that secures the optical-drive connector-board cable to the system board.
Post-requisites
1. Replace the
base
cover.
2. Replace the
optical
drive.
olevaid samme. Kui olete arvuti sees toimetamise lõpetanud, järgige jaotises
olevaid juhiseid. Ohutuse heade tavade kohta leiate enam teavet nõuetele vastavuse kodulehelt
Replacing the optical-drive connector board
17
Enne,
Pärast
35