Replacing the optical-drive connector board
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align the screw hole on the optical-drive connector board with the screw hole on the palm rest and keyboard assembly.
2
Replace the screw (M2x2) that secures the optical-drive connector board to the palm rest and keyboard assembly.
3
Connect the optical-drive connector-board cable to the system board and close the latch.
Post-requisites
1
Replace the
base
cover.
2
Replace the
optical drive
computer. After working inside your computer, follow the instructions in
(optional).
www.dell.com/
Replacing the optical-drive connector board
17
After working inside
35