Table of Contents
Advertisement
7. Update transceiver firmware
If required, the transceiver firmware can be updated with the RFXflash program.
Stop all connections with the transceiver and be sure that no other program connects the
transceiver during flash of the transceiver!
Start the RFXflash program, select the IP address and select the port (normally 10001).
Click the connect button:
Click the Open HEX file and select the correct firmware file.
RFXtrxLAN 433/868 Rev. 0.0
page 9 / 11
Copyright, RFXCOM 2023
Advertisement
Table of Contents
Need help?
Do you have a question about the RFXtrxLAN 433 and is the answer not in the manual?
Questions and answers