Table of Contents
Advertisement
6. Configure the transceiver
The transceiver can be tested and configured with the RFXmngr program.
Set the IP address of the RFXtrxLAN or use the Host Name.
Connect port 10001:
Select the protocols necessary for receive and click Set Mode followed by Save Settings.
No need to select protocols for transmit!
Note that you can only select 1 protocol for receive in the RFX868 because each protocol uses
different frequencies and modulation!!!
RFX433 settings:
RFX868 settings:
RFXtrxLAN 433/868 Rev. 0.0
page 8 / 11
Copyright, RFXCOM 2023
Advertisement
Table of Contents
Need help?
Do you have a question about the RFXtrxLAN 433 and is the answer not in the manual?
Questions and answers