Preface Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact Every effort has been made to ensure the accuracy and validity of this Guide. Any update of this Guide is subject to change without notice.
I1 I2 O1 O2 G IN G OUT Alarm out Audio out Module IPM100 has the similar interface to IPA102. When connect to external device, you can refer to that of IPA102. 2. Configure Network Parameters The factory default IP of camera is 0.0.0.0. Please set the camera and the PC in the same LAN and use IPCSearch to configure IP.
Page 8
3. Configure Parameters To control camera effectively, please configure camera parameters. Run IPCSearch to search devices, and double click the device to enter configuration interface. Both the login user name and password are admin. If user fails to download the ActiveX control, operate as follows: Click “Internet Options>Security>Trusted Sites>Sites”.
Page 9
User should rightly configure PTZ Protocol and Camera Address Code before he can control the camera. 4. Verification When user enter Live View interface and can view live videos, it means installation has been completed. For detailed configurations, please refer to the User Manual for Network Adapter IPA102.
Please refer to the licensing agreement accompanying the software for details of your rights with respect to its use. Kedacom does not warrant that the operation of the Kedacom Product will be uninterrupted or error-free. Kedacom is not responsible for damage arising from failures to follow instructions relating to the Kedacom Product's use.
During warranty service, it is possible that the contents of the Kedacom product's storage media will be lost, replaced or reformatted. In such an event, Kedacom and its authorized agents are not responsible for any loss of data or other information contained on the storage media or any other part of the Kedacom product serviced.