Monterey 208 LS Cuddy Owner's Manual page 63

Systems, Controls & Indicators
Ignition Switch – Starts and stops the engine. A built-in protection system
prevents the engine from starting in any other gear than neutral. Be sure to
consult the engine operator's manual for more information.
Horn Button – Push and hold to sound the horn.
Trim Switch – If your engine is equipped with
power trim and tilt, this switch activates that
function. Push and hold the switch until the engine
is at the desired angle. Use this switch in
combination with the trim gauge.
BOW DOWN
P
O
R
T
BOW UP
KC-0932
Engine Stop Switch and Lanyard – The
engine stop switch stops the engine when
engaged. Attach the lanyard to the boat operator
whenever the engine is running. If the operator is
thrown from the seat or moves too far from the helm,
the lanyard will engage the switch and shut off the
engine.
To attach the lanyard, connect one end to
the safety switch and the hook on the
opposite end of the lanyard to a
strong piece of clothing on the
operator, such as a belt loop.
Trim Tab Switches –
These rocker switches
control the trim tabs located
S
on the port and starboard
T
B
transom. Adjusting trim
D
tabs will improve the ride of
your boat and correct listing
from side to side due to
varying conditions.
TYPICAL
TRIM
SWITCH
SAFETY SWITCH
LANYARD
HOOK
KC-0931
KC-0950
3-7