Mounting/Dismounting - Komatsu AX20 Operation & Maintenance Manual

n CHECK OPERATION OF INCHING PEDAL (TORQFLOW TRANSMISSION LIFT TRUCK)
• Depress the pedal slightly (partially engage the transmission) and check that it is possible to carry out
inching.
• Check that the lift truck stops when the pedal is completely depressed.
n CHECK FOR ABNORMAL NOISE, ABNORMAL SMELL
• Check that there is no abnormal noise or abnormal smell when traveling at low speed.
• Check for odor of LPG, on LPG equipped lift trucks.
22.1.4 CHECKS WHILE OPERATING CONTROL LEVERS
n CHECK OPERATION OF WORK EQUIPMENT
Operate the work equipment control levers from the operator's seat and check that the forks can be raised and
lowered and that the mast can be tilted forward and back smoothly.
If there is any abnormality, please contact your Komatsu Forklift dealer immediately.
n CHECK FOR ABNORMAL NOISE, ABNORMAL SMELL
Operate the work equipment control levers from the operator's compartment and check that there is no
abnormal noise or abnormal smell during travel.
22.2

MOUNTING/DISMOUNTING

• Always mount/dismount
completely stopping the lift truck.
• NEVER jump on or off the lift truck as this is
very dangerous.
Mount and dismount facing the lift truck, using the foot of the
head guard as shown in the illustration.
only after first
22. TRAVEL OPERATIONS
3-29