Table of Contents
Advertisement
•
Be careful not to let the mast, overhead guard or load contact
electrical wiring, pipes, sprinklers or roof beams. If the truck hits such
objects, there is a risk that the load will fall or the lift truck will tip.
•
When the forks are raised, the mast height increases, so be
particularly careful when the forks are raised.
Do not use the forks to push or pull loads. There is a risk that the load will
be damaged or fall.
•
Do not let anyone place a load on the forks.
•
Do not let anyone remove a load directly from the forks.
•
Standing on the forks is dangerous because the forks are slippery and the load may move.
•
Do not use anyone to keep the load stable. The lift truck may move unexpectedly, causing the load to fall
and crush the person.
•
If you operate the lift truck in such a posture that your weight is not properly applied to the seat, like
standing up or leaning forward or sideways, Travel Interlock begins to alarm in approximately three
seconds and cuts off the transmission of engine power. Then the truck does not move even if you depress
the accelerator pedal or operate the Forward/Reverse lever.
•
The truck will slide downhill if Travel Interlock activates on an uphill grade or a slope.
OVERHEAD OBJECTS
NO PUSHING
PRECAUTIONS WHEN LOADING / UNLOADING
12. LOADING OPERATIONS
2-19
Advertisement
Chapters
Table of Contents
