Komatsu AX20 Operation & Maintenance Manual page 35

Hide thumbs Also See for AX20:
Table of Contents

Advertisement

Do not turn, or travel across or at an angle on slopes. There is danger that
the lift truck will tip.
Before starting to drive up a slope, stop the lift truck and adjust the
clearance between the ground surface and the bottom of the forks so that
the bottom of the forks or pallet do not contact the ground surface or the tip
of the fork does not stick into the ground when traveling.
For safe travel on slopes:
When loaded:
Travel FORWARD up the slope and in
REVERSE down the slope with the load
upgrade.
When unloaded:
Travel in REVERSE up the slope and FOR-
WARD down the slope with the load-engaging
means downgrade.
When traveling down slopes, use the braking force of the engine together
with the foot brake, and travel slowly down the slope.
Be careful of the truck sliding downhill if Travel Interlock is engaged while
traveling uphill or on a slope. Stay securely in the operator's seat!
NEVER JUMP OFF the lift truck even if it seems that it will tip. Always do
as follows:
1.
Hold the steering wheel securely.
2.
Stay in the operator's seat.
3.
Brace your legs.
If you jump off the lift truck when it turns over, there is danger that you
will be fatally crushed under the lift truck. If the lift truck tips over,
always stay in the operator's compartment then escape from the
lift truck after it has stopped.
Always wear the seat belt correctly.
TRAVEL ON SLOPES
DO NOT JUMP OFF LIFT TRUCK EVEN IF IT TIPS
11. SAFE TRAVEL
2-7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bx20

Table of Contents