Operator's Compartment; Adjusting The Seat Position; Adjusting The Reclining Angle - Komatsu AX20 Operation & Maintenance Manual

20. OPERATOR'S COMPARTMENT

20. OPERATOR'S COMPARTMENT
20.1

ADJUSTING THE SEAT POSITION

• Adjust the seat before starting operations or when changing operators at the beginning of a
shift. (Always stop the lift truck before adjusting the seat.)
• Adjust the seat to a position where it is possible to depress the brake pedal fully with your
back against the backrest of the operator's seat. (Always stop the lift truck before adjusting
the seat.)
It is possible to slide the seat forward or backward to set it to the
optimum position.
Pull lever (1) left. (In this condition, the seat slides forward or
backward.)
NOTICE
Set the seat to the optimum position, then release lever (1).
In this condition, the seat is locked in position.
Fore-and-aft adjustment: 5 in. (127 mm)
20.2

ADJUSTING THE RECLINING ANGLE

(OPTIONAL SUSPENSION SEAT)
With the suspension seat, it is possible to adjust the suspension to match the operator's weight in addition to
adjusting the fore-and-aft position and reclining angle.
1. Pull up the lever. (When the lever is raised, the angle of the seat
back can be adjusted.)
2. Adjust the angle of the seat back to a position where operation is
easy, then release the lever.
After adjusting, move the seat lightly to the front and rear to check
that it is securely locked in position.
3-16