No.
Spot to Wash
1
Meter Panel
•
Dashboard Front
•
2
Pedals
•
Floor Plate
•
Front & Rear Tires
3
•
Front & Rear Axles
4
Exterior parts other than the above
Other Precautions
33. LIFT TRUCK WASHING PROCEDURE
Washing Method
•
Wash from above by flushing with water from a hose.
•
Use low water pressure from the hose as illustrated below
(parts 1 and 2 only).
•
Wash using high pressure steam or flush with water from a
hose.
•
Do not steam or wash the tire angle sensor or electric wiring.
Wash with high pressure steam or flush with water from a hose.
•
Never wash the inside of the dashboard.
•
When using high pressure steam or water from a hose to
wash the engine room and power train parts under the floor
plate, cover the following parts and components with a tar-
paulin so that they do not get splashed with water:
-
the engine and transmission, including the electric wiring
for them.
-
electric system parts such as the connector and fuse
box.
4-35