Setting Up Your Camera; Pre-Installation Checklist; Camera Settings; Exposure Settings - Ikelite 69540 Instructions Manual

Setting Up Your Camera

Pre-Installation Checklist

1. Insert a fully charged camera battery.
2. Insert a properly formatted memory card.
3. Remove any attached lanyard or neck strap.

Camera Settings

•
EVF Auto Switch
Set
•
X-Sync.
Set
•
Flash mode
Set
"Slow2" rear-curtain sync may alternatively be used when using a
compatible DL3 DS Link TTL converter.

Exposure Settings

Refer to the Camera Settings
section of our website for recommendations on exposure settings for a
wide variety of shooting situations:
https://www.ikelite.com/blogs/cheat-sheets

Power Save

It is recommended to set the
the shortest intervals that makes sense for your shooting.
Instead of turning the camera off and on to conserve battery, the
camera will automatically sleep after the pre-set interval. To wake the
camera, simply perform an operation such as pressing the shutter
button halfway down.
10
to "Off."
to "1/250" when using an external strobe.
to "Fill in" when using an external strobe.
Cheat Sheets
Sleep
in the Photo School
Auto Power Off
and settings to