Installing the Camera
1. Remove any lanyard or neck strap which may be attached to the
camera.
2. Line the mount screw up with the camera's tripod socket. Use a flat
screwdriver to tighten the mount plate to the camera.
1/4-20 tripod
mount
3. Tilt the camera's LCD screen if desired.
4. Pull out on the housing control knobs to move the controls out of
the way.
5. Insert the mount plate into the slot on the inside bottom of the
housing. Push the camera all of the way forward until it stops.
6. Push housing control knobs in and check orientation with the
camera.
The camera may be attached to a tripod using the 1/4-20
»
threaded mounting hole on the bottom of the mount plate.
12
Mount screw
Camera
tripod socket
LENS