Table of Contents
Advertisement
64
www.electrolux.com
Problem
The quality of image from
the camera is poor.
The image from the cam‐
era has too much light re‐
flections.
13.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
14. ENERGY EFFICIENCY
14.1 Product Fiche and information according to EU 65-66/2014
Supplier's name
Model identification
Energy Efficiency Index
Energy efficiency class
Energy consumption with a standard load, con‐
ventional mode
Energy consumption with a standard load, fan-
forced mode
Number of cavities
Possible cause
The camera lens is dirty.
The light in the room is too
strong.
plate is on the front frame of the oven
cavity. Do not remove the rating plate
from the oven cavity.
.........................................
.........................................
.........................................
Remedy
Make sure nothing is be‐
tween the lens and the
door glass. Refer to the
"Care and Cleaning" chap‐
ter for camera cleaning.
Adjust the brightness and
contrast of the camera us‐
ing the settings in My Elec‐
trolux.
Clip the anti-reflective
shield for the camera on
the oven door handle.
Electrolux
EOB9958VAX
EOB9958ZOZ
EOS985X
81.2
A+
0.89 kWh/cycle
0.69 kWh/cycle
1
Advertisement
Table of Contents
