Table of Contents
Advertisement
When deactivated, the lever returns to its original starting position. The magnetic sensor is
connected to rinse aid warning light at control panel by wires. When the indicator lights up, it
should add more rinse aid.
1
2
3
Part Name: 1 – cover catch 2 – detergent power compartment
3 – cover 4 –sight glass
5 – rinse agent cap 6 – detergent tablet compartment
1
2
Part Name: 1 – electromagnetic valve 2 – lever
3 – plunger 4 – connecting rod
5 – magnetic sensor
Removal and Replacement
1. Remove outer door assembly. (see outer door removal and installation)
2. Pull out all terminals of dispenser. Then remove all screws for fixing dispenser.
Locking terminals
Part Name: 1 – dispenser brackets 2 – dispenser
5. Reverse the above procedure to install. And check out all connectors connects well.
Door Handle Assembly
Removal and Replacement
1. Disconnect power supply.
2. Remove outer door assembly. (see outer door
removal and installation)
3. Unfit all snap-fits of outer door assembly for fixing
microswitch (door handle assembly). And pull out
microswitch (door handle assembly).
Note
: Don't pull out all terminals of microswitch (door handle assembly)
4
5
6
3
4
5
Screws
1
2
Advertisement
Table of Contents
