Tank Assembly - Midea WQP6-3209 Technical Service Manual

Part name: 1 – sheet copper 2 – pressure switch hose 3 – pressure switch
4. Unfix the snap-fit of bottom board for
fixing pressure switch. And pull out
pressure switch
terminals of pressure switch
Note: mark all terminals' colors and
positions.
5. Reverse the above procedure to install.
And check out all connectors connects
well.

Tank assembly

Part Name: 1 – tank 2 – door handle assembly 3 – dispenser
4 – rod for door hinges 5 – right front chamber bracket
6 – strengthen muscle 7 – left front chamber bracket
Removal and Installation
1. Take off cutlery basket, basket and filter system.
2. Remove shell. (see shell removal and installation)
3. Take out two corner boards, absorber sound, backboard, hollow plate.
4. Remove all screws for fixing cover of protecting box cover. Put out all housings for
connecting operating board. Take out connecting lines of operating board from protecting
box. (see operating board removal and replacement)
5. Remove outer door assembly (with operating board). (See outer door removal and
installation).
hose. Pull out all
1
2
3
Snap-fits
of bottom
board
Locking
terminals
1
2
3
4
5
6
7