Part Name: 1 – door switch assembly 2 – absorber 3 – 4 –backboard
Door Lock Assembly
Removal and Replacement
1. Disconnect power supply.
2. Remove shell. (see shell removal and installation)
3. Unfit snap of door lock assembly, and push it out.
Snap
4. Pull out all terminals of microswitch fixed on the door lock assembly.
5. Reverse the above procedure to install. And check out all connectors connected well.
Air breaker
Removal and Replacement
1. Remove shell. (see shell removal and installation)
2. Take out absorbing cotton, upper basket and lower basket.
3. Contrarotate nut of air breaker and take out it.
Lave vaisselle ELVC 491B
Locking terminals
clamps
17
4
3
2
1