Operator Overview - Chamberlain LiftMaster CSW200101U Installation Manual

MANUAL RELEASE HANDLE
Pull the manual release handle to
manually open and close the gate.
REAR COVER
ACCESSORY POWER
OUTLET
ANTENNA
CONTROL BOARD
Pages 26-30
EXPANSION BOARD
Pages 31-34
JUNCTION BOX
Page 35

OPERATOR OVERVIEW

RESET BUTTON
• Press the reset button to stop a moving gate during a normal
open/close cycle, like a stop button.
• Press the reset button once while the gate is in open position
to disable the Timer-to-Close. The gate will stay in the open
position. To restart the Timer-to-Close either press the reset
button or activate the gate with a programmed remote
control.
• Press the reset button to shut off the alarm and reset the
operator.
CLUDGE COVER
OPERATOR ARM
LIMIT SWITCHES
Page 22
AC POWER SWITCH
The AC Power switch on the operator will turn the
incoming 120 Vac power ON or OFF.
DUST GUARD
25
1 HP OPERATOR
FRONT COVER